IS 4031-9 METHOD OF PHYSICAL TEST FOR HYDRAULIC CEMENT PART 9 DETERMINATION OF HEAT OF HYDRATION

IS 4031-8METHOD OF PHYSICAL TEST FOR HYDRAULIC CEMENT PART 8 DETERMINATION OF TRANSVERSE AND COMPRESSIVE STRENGTH OF PLASTIC MORTAR USING PRISM

Name of Standard -IS 4031-9 METHOD OF PHYSICAL TEST FOR HYDRAULIC CEMENT PART 9 DETERMINATION OF HEAT OF HYDRATION

Scope of Standard - This standard (Part 8) covers the procedure for determining the heat of hydration of cement as expressed in kilojoules per kilogram.

Covered test method in Standard-  

1. Sampling and Selection of test specimen
2. Temperature and Humidity 
3. Appartus Used - Calorimeter, Mortar and Pastle, Glass/Plastic Vials, Stop watch or Timer, Sieve, Muffle Furnace, Analytical Balance, Standard Weight, Weighing Bottles, Camel Hair Brush
4. Material Used - Nitric Acid, Hydrofluoric Acid, Zinc Oxide, Wax, Distilled Water
5. Determination of the Hear Capacity
6. Preparation of Cement Sample
7. Determination of the Heat of Solution
8. Ignition Load

Name of Standard Organisation - Bureau of Indian Standard
Division Name - Civil Engineering
Section Name  - Cement 
Designator of Legally Binding Document - IS 4031 PART 9
Title of Legally Binding Document - IS 4031-9 METHOD OF PHYSICAL TEST FOR HYDRAULIC CEMENT PART 9 DETERMINATION OF HEAT OF HYDRATION